Washing machine repair and maintenance tend to cost a lot of money. This is why most washer owners prefer to fix their washer on their own rather than hire someone to do the job. But in most cases, they end up damaging their washer even more. You will also be surprised to find out of a number of mishaps experienced by people who attempted to troubleshoot their washer.
If you want to avoid problems, you should know how to fix your washer well. Here are some tips:
Tip 1: Before opening washer motor or drum, you should unplug it first lg washer repair los angeles. Let the machine rest for about 15 minutes. Some washers have parts that are good conductors of energy. Even if the washer is not directly connected to the electrical outlet, the energy it has sucked previously can still run inside. This can still cause electrical shocks. You should let your washer rest for a few minutes first before doing anything.
Tip 2: Turn the water source off. If you are going to remove the hose from the washer and the water source, make sure you have an empty bucket nearby or a towel to absorb the excess water expelled by the hose. This will prevent spilling of water on the floor.
Tip 3: Do not pull your washer forward especially if you have rough floor surface. Ask someone to help you lift the washer. If no one is available to help you out, try to lift one side of the washer forward and do the same to the other side. “Walk” the washer forward instead of pulling or pushing to avoid damages to the bottom part of the machine.
Tip 4: When lifting your washer, make sure you do not tilt it to lay it on its back. There is excess moisture inside the machine and you would want to prevent it from flowing in the circuit area of the laundry appliance. Always keep the washer in an upright position.
Tip 5: Use rubber gloves when troubleshooting the motor of the machine. Cloth is a poor conductor of energy so you won’t get electrocuted if you protect your hands with it.
Tip 6: Assess the extent of damages first before attempting to fix it. If the problem cannot be solved by merely replacing the damaged parts, you might need the help of a professional.
Tip 7: Wipe excess moisture on the floor or on the exterior of the washer. Make sure the place around is dry to avoid electric shocks.